Ground Shark High Performance (HP) Brush Cutter

HP render1
hp render 2

The High Performance Brush Cutters offer a robust solution for clearing a wide range of grasses, brush and hardwoods up to 10" in diameter. Both models include a radial piston direct drive hydraulic motor for higher efficiency and extended durability, while an optimized tri-lobe blade carrier design allows for a fast startup and recovery time.

  • FEATURES
  • SPECIFICATIONS
  • INDUSTRIES
  • LITERATURE
  • Exclusive patented retractable cutting forward shield. When using the Ground Shark on brush/trees that are bigger than 4" in diameter, the shield will retract on its own to allow for maximum performance.
  • Blade retention bolt hex shank is design to prevent the bolt from rotating under extreme cutting conditions.
  • Standard MulchPower™ gauge is visible to the operator and helps prevent excessive stalling and overheating.
  • The Ground Shark line of brush cutters include special hydraulic valving to shut the cutter head down quickly and safely. There is a distinct audible sound during the shutdown which will indicate to the operator that the blades are coming to a stop.
  • Higher recovery rate than extreme duty models.
SAE
Metric
GS72HPGS84HP
ORDER CODE31872-002231872-990331872-992531884-002231884-990331884-9925
COUPLER SIZE1/2 IN5/8 IN3/4 IN1/2 IN5/8 IN3/4 IN
OVERALL HEIGHT30.5 IN30.5 IN30.5 IN30.5 IN30.5 IN30.5 IN
OVERALL WIDTH77.13 IN77.13 IN77.13 IN89.13 IN89.13 IN89.13 IN
OVERALL LENGTH89.4 IN89.4 IN89.4 IN98.5 IN98.5 IN98.5 IN
CUTTING WIDTH72 IN72 IN72 IN84 IN84 IN84 IN
MINIMUM CUTTING HEIGHT2.5* IN2.5* IN2.5* IN2.5* IN2.5* IN2.5* IN
CUTTING CAPACITY10 IN10 IN10 IN10 IN10 IN10 IN
DECK THICKNESS.25 IN.25 IN.25 IN.31 IN.31 IN.31 IN
RECOMMENDED FLOW30-45 GPM30-45 GPM30-45 GPM30-45 GPM30-45 GPM30-45 GPM
REQUIRED LIFT CAPACITY2600 LBS2600 LBS2600 LBS3000 LBS3000 LBS3000 LBS
WEIGHT1895 LBS1895 LBS1895 LBS2178 LBS2178 LBS2178 LBS
Agriculture
Land Management

Locate a Dealer

Enter your zip code to find your nearest Paladin dealer